6802 Twin Centre  - This control system was manufactured by Uhlenbrock Digital for Fleischmann.  Although the Twin Center is no longer available from Fleischmann it is still made and available from Uhlenbrock as the 65060 Intellibox Basic.  There is also an advanced version available as the 65100 Intellibox II.

680201 Twin Centre V2.000 Upgrade In Stock

Upgrade your Twincentre to the 2010 specification Version 2.000 using this CD.

Fleischmann have released the latest software, developed by Uhlenbrook, which allows you to:

• Increase the loco functions from 8 to over 32,000 (we'll leave it to you to descide what they will all be used for!)
• Find Loco Function - the address of any loco placed on the programming track will be automatically called up (DCC and FMZ addresses)
• Favorites for electrically operated accessories extended from 255 to 2000.
• Four digit loco addresses now available
• Twin Centre can be set as a slave and used in place of a Twin Control

 6822 Twin Control  - This additional control system was manufactured by Uhlenbrock Digital for Fleischmann.  Although the Twin Control is no longer available from Fleischmann it is still possible add to your Fleischmann digital system using units form our Uhlenbrock Digital  range.  It is now also possible to convert a spare 6802 Twin Center to become a 6822 Twin Control using the Fleischmann 680201 Twin Center Version 2.00 upgrade.  The Uhlenbrock 63 240 Power4 booster provides many of the features of the Twin Control for layout power management.

6831 Train Navigation Start Set This item is now discontinued - However the train navigation system is fully supported by the Uhlenbrock LISSY range.

The set consists of 2 navigation transmitters, 2 navigation receivers with 2 sensors (each), 2 LocoNet-cables (2,15 m) and 1 manual “TRAIN-NAVIGATION”.

To get you started the set comes pre-programmed to control a passing siding and the receiver module are addressed 11 and 12.  This programming may be easily changed to suit your needs.

6858 DCC Decoder In Stock

For DCC as per the NMRA-standard. For locomotives with 6-pole socket as per NEM 651. Maximum power rating: 600 mA. Size (max.): approx. 13 x 9,1 x 3,7 mm. Especially designed for use with N gauge 

6859 DCC Decoder No longer made

For DCC as per the NMRA-standard. For locomotives with 6-pole socket as per NEM 651. Maximum power rating: 600 mA. Size (max.): approx. 13 x 9,1 x 3,7 mm. Lead length: approx. 35 mm. Size (max.): ca. 13 x 9,1 x 3,7 mm. Especially designed for use with N gauge. 

We can make a suitable replacement using a lenz 10310 silver mini and plug

686702 Fleischmann multiMAUS Pro Set with wireless multiZENTRALE Pro and Rocomotion 5.8 IIn Stock

This set provides an inexpensive route into the world of computer control with the added advantage of a wireless handset for digital control based on the sucessful multiMAUS system. The set contains the multiMAUS pro handset, the multiZENTRALE pro command station and the software for Rocomotion 5.8.

The multiMAUS pro is a wireless handset with a clear digital display which can control up to 9,999 locomotives and 1024 switches / magnetic accessories. 20 functions are supported as well as double traction. The wireless technology allows you walk about freely and still operates even if pointed away from the command station.  The handset uses three AAA batteries and has a low battery warning and energy saving mode.

The multZENTRALE command station is the brains of the system and is fully complient with current DCC standards. Provision has been made for the new bi-directional DCC protocol being developed by the NMRA. The command station may also be used in conjunction with older lokMAUS and cabled multiMAUS handsets and three ports are provided for connection to RocoNet.  A programming track is supported with automatic changeover when you entre programming mode. A USB connection allows the multiZENTRALE to communicate with a PC using the Rocomotion software and allows for decoder programming, control of a layout from your PC with a full track schematic, one train may also be controlled automatically from your PC.  There is full overload and short-circuit protection on the track inputs.

The RocoMotion software is based on RailRoad & Co's Traincontrol system.  The package contains RocoMotion track display and control software, Trainanimator software for creating images of locomotives and TrainProgrammer which allows CV editing (Read and modification of CV's 1-255)  System requirements: - At the computer free interface RS232, approx. 10 MB of free Hard disk, processor at least PC Pentium 400MHz, screen representation 1024x of 768 pixels. Operating systems Windows 9X; SE, ME, NT, 2000, XP, Vista.

You will need to add a suitable 16v AC transformer such as the Lenz TR150

6872 DCC Decoder In Stock

For DCC as per NMRA standard. For locomotives with 6-pole socket as per NEM 651 standard. Maximum power rating: 1000 mA. Size (max.): 20 x 10,5 x 3,8 mm. 
 

6878 DCC Decoder In Stock

For DCC as per the NMRA-standard. The Decoder is power regulated and protected against short circuit. For locomotives with 8-pole socket as per NEM 652. Maximum power load: 1000 mA. Size (max.): approx. 20,3 x 10,6 x 4,1 mm. Lead length: approx. 80 mm

For DCC as per NMRA-Norm. With 6 leads to convert D.C. locos without socket. Installation should be carried out by specialist dealer. Maximum power rating: 600 mA. Lead length: approx. 150 mm. Especially designed for use with N gauge. In Stock